Description
Planning a beach camping adventure or love beach daytrips? Then you need the genuine Aussie-made Ground Grabba Lite sand pegs from 4WD Supacentre – the best way to secure your awning, swag, tent, tarp or gazebo when you’re out on the sand!
These cracking sand pegs are made from glass-reinforced nylon and feature a clever spiral design that spreads out wide into the sand as they enter. Unlike normal sand pegs that struggle in soft sand, Ground Grabba Lites bite into the sand for serious securing power!
They measure 400mm in length, so you can really drive them down deep for extra strength. Ground Grabba Lites work best on medium to hard compact sand. If you’re camped on dry, soft sand, simply clear away a bit of sand and dig down until it gets firmed, to give you a good surface to dig into.
Ground Grabba Lites can be installed into soft sand by hand, or with the use of a drill. If installing them by hand, push down with firm pressure and use the hook as a handle to help you twist them as you go. The more pressure you put on them as you drive them into the ground, the better they’ll bite!
Got a cordless drill with a rating of at least 60Nm? Then grab yourself a square bit driver and a 19mm socket, and you’ve got the ultimate way to drive your Ground Grabba Lites into the ground!
Unlike normal pegs, Ground Grabba Lites don’t need to be fully buried to work. Leave the top exposed just enough to get your guy rope on the hook, adjust and you’re good to go!
Don’t let your awning get caught and destroyed by the wind, and don’t struggle to put up your tent or swag – score a set of the genuine Ground Grabba Lite sand pegs from 4WD Supacentre and make your next beach adventure the best one ever!
Comes with a full one-year warranty. A quality Australian-made product!
NOTE: Only use a drill and NOT a cordless impact wrench to install Ground Grabba Lites into soft sand. An impact wrench may cause damage to the Ground Grabba Lites and may void warranty.
Length: | 400mm |
Material: | Glass-reinforced nylon |
Max flight (spiral) width: | 48mm |
Max shaft thickness: | 15mm |
Hex head: | 19mm |
Weight: | 170 grams |
Reviews
There are no reviews yet.